2. Quick Setup

❶ Connect Micro USB cable between host PC and EM1126 Micro USB port.

❷ Plug the USB-to-UART cable between PC and EM1126 console connector.

❸ On the host PC, start a terminal emulation program (such as SecureCRT) with the following serial port settings:

BaudRate	Data Bits	Stop Bits	Parity	Flow Control
1500000	8	1	None	None

❹ Connect the board and 10.1-inch MIPI LCD.

❺ Plug the 12V/3A power supply into the DC jack, EM1126 will turn on and boot into system.