5. Burn Images

❶ Unzip RKDevTool_Release_v2.84.zip on Windows.

❷ Open RKDevTool_Release_v2.84/RKDevTool.exe

_images/Burn_Images_1.jpg

❸ Connect PC and development board with USB Type-C cable, keep pressing the Recovery key and power the board until the windows PC shows Found One LOADER Device.

_images/loader.jpg _images/Burn_Images_2.png

❹ Click Upgrade Firmware -> Firmware, select update.img. Click Upgrade to flash.

_images/Burn_Images_3.png _images/Burn_Images_4.png _images/Burn_Images_5.png

User can also update the firmware separately.

❶ Click the column on the right side for the path of the file want to flash.

❷ Select the checkbox on the left.

❸ Click Run to flash the image.

_images/update_firmware_separately_1.png _images/update_firmware_separately_2.png